This tutorial will guide you through the first use of your new Creatista Pro machine. First, insert the drip tray and the capsule container in position. For your safety, operate the machine only with drip tray and capsule container in position. Plug the machine into the power outlet and turn the machine ON by pressing the power button. Tap to select your language and save. On-screen instructions will now help you set up your machine. Remove the water tank and rinse it using fresh potable water. Fill the water tank up to the MAX level with fresh potable water and attach it back to the machine, in position. It is recommended to set the water hardness to ensure the quality of your coffee, time after time. The water hardness setting along with the amount of use will define the descaling frequency of your machine in order to prevent damage. To do so, make sure you use the same water source to conduct the test. Dip the test strip in a separate glass of water for 1 second and wait for 1 minute for the results.
Once your test result is shown on the strip, save it on your machine. The water hardness is now set. To rinse the machine and prime the heating system for the first use cycle, place the empty milk jug under the coffee spout and press start. Your machine will automatically stop rinsing when the cycle is complete. Remove the milk jug and the drip tray, and discard the content. The overall setting process is complete. You can now enjoy your new Nespresso Creatista Pro machine.