This tutorial will guide you through a coffee and milk preparation with your Nespresso Pixie machine and your Aeroccino. As a general safety tip, do not put the Aeroccino in the dishwasher as there is a risk of electrical shock and fire! Furthermore, make sure the underside of the milk frother is dry. Before using the Aeroccino we suggest that you wipe the jug with a clean damp cloth. You should then place the whisk element into the correct position.
Fill the jug with fresh milk to the desired level, as marked by the indicators on the inside wall. The highest «max milk» level indicator is for hot milk preparations, while the lowest «max foam» level indicator is for milk froth preparations. Before you select a sequence place the lid onto the Aeroccino and plug it to the base. For a hot preparation, briefly press the button to start. The button lights up red and it will turn off after approximatively 80 seconds when the milk preparation is ready. For cold milk froth, keep the button pressed for 2 seconds, it will light up blue. Your cold milk froth will be ready after approximatively 60 seconds when it will turn off. Pour the frothed milk into a large recipe glass. Place the cup under coffee outlet and press either the Espresso or Lungo button.
The coffee will be brewed directly over the frothed milk. You can now enjoy your coffee and milk preparation.
Please note the Aeroccino must be cleaned after every use. Remove the whisk, dismantle the spring and remove the seal from the lid.To clean, use hot water, a cleaning agent and wipe the jug with a damp cloth. Avoid any sharp objects, brushes and abrasives to not damage the jug coating.