This tutorial will guide you through the cup size programming with your Nespresso Gran Lattissima machine. Your Gran Lattissima machine is pre-programmed to obtain the best in-cup result In order to get as close as possible to your personal expectations, you can reprogram the volume of your coffee according to your tastes. First, turn the machine ON and wait until the lights are steady. The machine is ready. Fill the water tank with fresh drinking water and insert the capsule. Place a cup under the coffee outlet. Then touch and hold the button relative to the drink you want to programme for at least 3 seconds to enter the programming mode. Brewing starts and button blinks fast.
Release the button when desired volume is reached. If the recipe includes other ingredients, press again the button and keep pressed until the desired volume is reached, then release. When the last ingredient is delivered, button blinks 3 times to confirm the new drink volume. Drink volume is now stored for the next preparations. You can restore the quantities to the factory settings at any time. Switch the machine ON and remove the milk jug. Press simultaneously the hot milk button and the flat white button for 3 seconds to enter Menu mode: descaling and clean alert start blinking. Please note the Menu mode exits automatically after 30 seconds if no actions are performed.
The Menu mode can be exited manually by pressing simultaneously the hot milk button and the flat white button for 3 seconds. Press the flat white button. It will start blinking. Press again the flat white button. It will blink 3 times rapidly to confirm restoring the quantity to the factory setting.